What is a Click Clock?

Sommario:

1. What is a Click Clock?
2. How do I turn off the alarm on my flip click clock?
3. How do you set a gingko clock?
4. How do you change the time on a lexon flip clock?
5. How do you set an alarm on a flip clock?
6. How do you change the time on a flip clock?
7. How do you put batteries in a lexon flip?
8. How do I set the time on my lexon flip alarm clock?

What is a Click Clock?

It lights up again when you give a gentle touch, or a cheerful clap, or a magical click of your fingers. The Flip Click Clock only tells you the time (12 or 24 hour format) instead of alternating between date and temperature. ... Flip Click Clock, it's not an ordinary alarm clock.

How do I turn off the alarm on my flip click clock?

When the alarm goes off, gently 'stroke' any of these engraved buttons on the top to snooze and to turn off the alarm, you can easily flip it over and the numbers will be magically corrected to a normal display as well, keeping the same time and moving as accurate as before.

How do you set a gingko clock?

Long touch on the HR or MIN button for 5 seconds until a beep to access the time setting mode and both hour and minute numbers on the display screen will start flashing. 2. Short touch on HR / MIN buttons to adjust the hour or minute number.

How do you change the time on a lexon flip clock?

Setting – Time & Alarm The clock is 12/24 hours selectable.. Press the “SET” button for 3 seconds until the time on the LCD starts flashing. Then press the “SET” button again to enter into select mode. Press the “+” or “-“ on “HR” or “MIN” button to select setting.

How do you set an alarm on a flip clock?

How to set the alarm function

1. With ON facing upwards you will notice a small clock appear in the bottom right hand corner.
2. Press the hour and minute + and – buttons until you have the correct alarm time.
3. The alarm is now set.

How do you change the time on a flip clock?

Setting – Time & Alarm The clock is 12/24 hours selectable.. Press the “SET” button for 3 seconds until the time on the LCD starts flashing. Then press the “SET” button again to enter into select mode. Press the “+” or “-“ on “HR” or “MIN” button to select setting.

How do you put batteries in a lexon flip?

REVIEW: LEXON FLIP alarm clock

1. Open the box and empty out the AAA batteries (yes they come supplied!) and the FLIP in your chosen colour.
2. Unclip the battery panel and insert the two AAA batteries, close the battery panel.

How do I set the time on my lexon flip alarm clock?

How to set the alarm function

1. With ON facing upwards you will notice a small clock appear in the bottom right hand corner.
2. Press the hour and minute + and – buttons until you have the correct alarm time.
3. The alarm is now set.